FJ-4 Stainless steel examination table
FJ-4 Stainless steel examination table Use:
1，The bed mother USES the non-fingerprint stainless steel plate with the delta 1.2 mm, the bed body welding quality is firm, the weld is the whole.
2，The main body of the bed is made of phi 32 x 1.2 mm round tube, and the horizontal tube is not embroidered with steel phi 25 x 1.2 mm round tube.
3，The bed surface should be strengthened by the 23 x 23 by 1.2mm stainless steel tube, the average arrangement.
4, the infusion lever USES phi 22 x 1.2 mm round tube.
5, 4 cm high density full sponge + artificial leather
FJ-4 Stainless steel examination table instructions：
1, the bed can be tilted manually adjust the back and hip function, fold up to 70 ° + 5 ° back; Hip to 30 ° inclined + 5 °.
2，The body weight is greater than 150 kg, no deformation.
3，This bed design has the handle and the active ankle, convenient the patient is fixed.
4，This bed design has a funnel, which is convenient to remove and excrete.
5，The base of the bed is 430mm above ground, facilitate clinical examination and hygienic cleaning.
FJ-4 Stainless steel examination table logistics：